Canvas Wood and Metal Primer

Product Info:


Ashirbad interior cement primer is a specifically formulated acrylic emulsion-based primer that can be used to apply interior sand plastered surfaces, concrete, brickwork, asbestos, and other materials. It reduces the surface's absorbency. It dries quickly, has a rapid recoat time, and leaves a smooth finish. It works as a bonding agent, allowing the paint to cling to the surface more effectively. This primer improves paint adherence to the surface, enhances paint longevity, and protects the surface being painted.

Canvas Wood and Metal Primer
Ashirbad Paints Ashirbad Paints Ashirbad Paints Ashirbad Paints Ashirbad Paints Ashirbad Paints Ashirbad Paints Ashirbad Paints
Technical Characteristics The Product
Composition Binder in water dispersion, fillers, titanium dioxide
Specific Weight 1.65 kg/ltr
pH 8.0 ~ 9.0
Appearance Thick creamy white paste
VOC Low
Shelf Life 3 years from date of manufacture in original tightly closed containers away from direct sunlight
Storage Temperature +2OC ~ +36OC
Fire Reaction Negative when applied onto not flammable surfaces
Technical Characteristics Application
Coverage 90 ~ 100 sqft/kg in 1 coats
**Actual coverage may vary due to application method and surface roughness.**
Dilution 40 ~ 60% with drinkable water
Application Tools Brush, Spray gun
(1.7mm nozzle), Roller
Application Temperature +15OC ~ +45OC
(when relative humidity not over 80%)
Drying Time Surface dry - 30 min
Hard dry - 4 ~ 6 hrs
Fully cured – 24 ~ 72 hrs
(temperature = +20OC with relative humidity not above 75%)
Tools Cleaning Water
Stability of Thinned Paint To be used within 24 hours

Important:

The product, characterized by outstanding pervasion and hiding level, consolidates the wall while limiting and balancing the absorbency over the whole surface. Ashirbad acrylic distemper is non-toxic, not flammable and harmless to health and environment

Alkaline surfaces, cement plasters, gypsum plasters, rough plasters and old walls in interiors.

Surface should be dry and mature. Surface to be painted should be free from grease, dirt, dust or all kinds of loose particles. All surface imperfections should be leveled.

3 parts of Ashirbad acrylic distemper paint should be mixed well by adding 2 parts of water by weight to make a brush able consistency and applied in two coats or more as required to get satisfactory results.

Store the container in cool & dry place. Keep out of the reach of children and away from food, drink and animal feed. May be harmful if swallowed. In case of ingestion seek immediate medical attention. Ensure good ventilation at all times. Wear eye protection during application. In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. Do not put leftover paint down the drains or in water courses.

Pre Painting Process:

  • PLASTER New masonry surfaces must be allowed to cure completely. It is recommended to allow 28 days as the curing time for new masonry surfaces.
  • CLEANING Surface should be free from any loose paint, dust or grease. Growths of fungus, algae or moss should be removed by wire brushing and water. In case of areas having excessive dampness use Ashirbad Paints Damp Care to limit further dampness.
  • FILLING FOR CRACKS For filling cracks upto 3mm use Ashirbad Paints Crack Fill Paste.
  • FILLING FOR HOLES & DENTS In case of dents and holes use Ashirbad Paints Acrylic Wall Putty or white cement and fine sand in the ratio 1:3
    For interior surfaces or substrates that are subjected to continuous seepage or dampness, kindly use Ashirbad Paints Damp Care before the top coat application.
  • Paint Application Process:
    Step 1 Sanding
    Step 2 Ashirbad Cement Primer Brush / Roller / Spray
    Step 3 Ashirbad Acrylic Wall Putty Putty Knife
    Step 4 Sanding
    Step 5 Ashirbad Cement Primer Brush / Roller / Spray
    Step 6 Sanding
    Step 7 First Coat Emulsion Paint Brush / Roller / Spray
    Step 8 Second Coat Emulsion Paint Brush / Roller / Spray
    To ensure proper surface preparation before painting.
    No loose material on surface.
    • Ensure covarage does not exceed by more than 10% recommended figure.
    • Insist dilution of paint as per paint manufacturer’s recommendation.
    • Insist on proper crack filling & re-plastering loose plaster before painting.
    • Insist on proper water proofing before start of painting.
    • Insist on recommended no. of primer & top coats.
    For longer life of paint.
    • Insist on 3 coats for horizontal surfaces on exteriors.
    • Insist on bio-wash treatment to kill Algae/Fungus infestation.
    • Insist on high quality paints.
    • Avoid cementations paints on smooth exteriors surfaces.
    • Insist on 100% acrylic paints in high rainfall areas.
    • Do not paint wet or newly plastered surfaces with visible moisture.
    • Allow enough time for curing and drying.
    • Do not attempt interior painting during heavy rain and high humidity.
    • Postpone exterior paint during rain & when it is likely to rain within 4 hours of painting.
    • Do not speed up the recommended painting process. Give enough drying time between coats.
    • Do not use Universal Stainers for tinting exterior shades.
    • Do not paint during the atmospheric temprature is below 15O C and above 40O C and Humidity 80-85%.
    • Do not cure any paint with water.
    • Do not use any type of spray plaster or POP or interior putty under exterior paints.

    Contact Us

    We are here to help!

  • Corporate Office:


    Shankhamul-10, Kathmandu, Nepal

    01-5242140
  • Branch Office:


    Prabhat Path, Bhairahawa, Nepal

    071-573974
  • Factory:


    Nepalgunj Industrial Estate-13, Banke, Nepal

    081-531193